OpenShoe

The pages and doc­u­ments under this sec­tion con­tain descrip­tions and doc­u­men­ta­tion of how to repro­duce the Open­Shoe sys­tem. You do not have to read the sys­tem descrip­tion before you read this sec­tion even though it might help. Repro­duc­ing the sys­tem is not hard and only requires very basic elec­tron­ics and soft­ware skills. How­ever, it’s a mat­ter of how much you choose to do yourself.

To repro­duce the sys­tem, start read­ing the Get­ting started to get a feel­ing for what is required. After that it’s prob­a­bly a good idea to start with the Hard­ware since these parts have the longest lead times. Once you have got started with hard­ware you can look into the Soft­ware.

Doc­u­men­ta­tion and descrip­tions for repro­duc­ing the nec­es­sary parts can be found under:

• Repro­duc­ing the Open­Shoe hard­ware see Hard­ware.
• Instal­la­tion, pro­gram­ming, and compiling/building the Open­Shoe soft­ware see Soft­ware.

Cad­Soft Eagle schematic, lay­out, land pat­terns and BOM for the new mod­ules can be found here:

MIMU22BTv2_Eagle_files

BOM MIMU22BTv2

NOTE THAT ONLY AN EARLIER VERSION OF THESE FILES (SAME SCHEMATIC) HAVE ACTUALLY BEEN TESTED. USE THEM AT YOUR OWN RISK. THIS SPECIFIC DESIGN SHOULD BE TESTED BY EARLY APRIL 2014.

STL-files for the cas­ing can be found here:

Casing_STL